Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product List
Model: HWS
merk: KEYUACE
verpakkingen: Standaard en volgens klant vereist
produktiviteit: 1000000
vervoer: Ocean,Air
Plaats van herkomst: China
Ondersteuning over: 100000
Haven: YanTian,Shenzhen
betaling Type: L/C,T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF
Stalen pijplijn Heat Shrink Sleeve
HWS Steel Pipe Heat Shrink Sleeve, Pipeline Engineering Tubing is ook bekend als heat shrink weld belt / Heat shrinkable weld sleeve (belt), Pipeline Insulation Tape , Heat Shrink Polyethylene , Polyethylene Terephthalate Tubing gemaakt door bestraling cross-linked polyolefine basismateriaal en speciale afdichting hete gesmolten lijm. Het heeft een hoge mechanische sterkte, stabiele prestaties, weerstand tegen veroudering, anti-chemische corrosie, afdichting, sterke kleefkracht, eenvoudig te bedienen, etc.
Product applicatie:
1, van toepassing op aardolie, aardgas, chemische techniek, stookgas en anderen projectleidingennetwerk voor anticorrosief van staalpijpleiding herstelde en gelaste verbinding. En ook van toepassing op corrosiebestendige deklaag voor het herstellen van de breuk.
2, van toepassing op 2PE, 3PE, FBE, PP, CTE anti-corrosie coating pijpleiding voor anti-corrosie van gelast knooppunt en bocht gebied.
Specificatie:
Bij gebruik van krimpkousen, eerst de pijpleiding voorverwarmen tot 55 graden C ~ 60 graden C en dan de verbindingsriem rond de behandelde pijpleiding wikkelen met de warmtekrimpende verbindingsriem, zorg ervoor dat de overlappingsbreedte van de overlappende heupband groter is dan 50mm, krimpt het in radiale richting wanneer de hitte op het beïnvloedt, tegelijkertijd begint de hete smeltingskleefstof te smelten, te vullen en het oppervlak van de pijpleiding te behandelen, vormt ononderbroken en dicht anti-corrosiesysteem met origineel pijpleidingsantisma corrosie coating.
Executive Standard: SY / T0413-2002 en SY / T4054-2003 en GB-T23257-2009.
Kenmerken & Voordelen
1, uitstekende adhesie vermogen, hechtingsbereik is breed: kan hechten met staal, PE, epoxy coating, etc.
2, sterk in corrosiebestendigheid: kan effectief blokkeren een verscheidenheid van medium permeabiliteit en corrosie, weerstand tegen veroudering, barstende bestendigheid tegen barsten van de omgeving, weerstand tegen UV-bestraling.
3, Hoge mechanische sterkte: compressieweerstand, schokbestendigheid, schuifweerstand.
4, breed gebruik bereik: kan instrueren bij-25 ~ 35 graden C temperatuurbereik.
5, geen vervluchtiging, veiligheid in gebruik, kan energie besparen, kan het milieu beschermen
6, Lange levensduur.
7, snel krimpen, eenvoudig te bedienen, eenvoudig te installeren.
8, lage voorverwarmingstemperatuur: wanneer voorverwarmen -55 graden C ~ 60 graden C, kan installeren om te krimpen.
Test standard |
GB/T23257-2009(Buried steel pipe polyethylene anti-corrosion technology standard) |
||||||||
Text item |
Unit |
Test result |
Technical date |
Test method |
|||||
Base material |
|||||||||
Tensile strength |
Axial direction |
MPa |
35 |
≥17 |
GB/T1040.2-2006 |
||||
Circumference direction |
MPa |
28.3 |
≥17 |
||||||
Elongation at break |
Axial direction |
% |
456 |
≥400 |
GB/T1040.2-2006 |
||||
Circumference direction |
% |
432 |
≥400 |
||||||
Vicat softening point |
℃ |
98.6 |
≥90 |
GB/T1633-2000 |
|||||
Brittle temperature |
℃ |
<-65 |
≥-65 |
GB5470-1985 |
|||||
Electrical strength |
MV/m |
28 |
≥25 |
GB/T1408.1-2006 |
|||||
Volume resistance |
Ω.m |
2.1×1014 |
≥1×1013 |
GB/T1410-2006 |
|||||
environment stress cracking resistance |
h |
>1000 |
≥1000 |
GB/T1842-1999 |
|||||
Resistance to chemical medium corrosion(7d) |
10% |
Axial direction |
Tensile Strength |
% |
88.4 |
≥85 |
GB/T2357-2009 |
||
Elongation at break |
% |
102 |
≥85 |
||||||
Circumference direction |
Tensile Strength |
% |
95.3 |
≥85 |
|||||
Elongation at break |
% |
125.6 |
≥85 |
||||||
10% |
Axial direction |
Tensile Strength |
% |
168 |
≥85 |
||||
Elongation at break |
% |
96.6 |
≥85 |
||||||
Circumference direction |
Tensile Strength |
% |
112 |
≥85 |
|||||
Elongation at break |
% |
96.3 |
≥85 |
||||||
10% |
Axial direction |
Tensile Strength |
% |
98.5 |
≥85 |
||||
Elongation at break |
% |
89.4 |
≥85 |
||||||
Circumference direction |
Tensile Strength |
% |
123 |
≥85 |
|||||
Elongation at break |
% |
106.3 |
≥85 |
||||||
Heat aging resistance |
Axial direction |
Tensile Strength |
MPa |
112 |
≥14 |
GB/T1040.2-2006 |
|||
Elongation at break |
% |
96.3 |
≥300 |
||||||
Circumference direction |
Tensile Strength |
MPa |
98.5 |
≥14 |
|||||
Elongation at break |
% |
89.4 |
≥300 |
||||||
Heat melt adhesive |
|||||||||
Peel strength |
Epoxy resin primer |
N/cm |
99.4 |
≥70 |
GB/T2792-1998 |
||||
Polyethylene |
N/cm |
88.2 |
≥70 |
Model |
Outer diameter.(MM) |
Width ((MM) |
Base film thickness(MM) |
Heat melt thickness(MM) |
length (MM) |
Fixed width(MM) |
Sacrifice belt width(MM) |
HWS 159 |
Φ159 |
500 |
1.2 |
1.0 |
680 |
100 |
≥150 |
HWS 219 |
Φ219 |
500 |
1.2 |
1.0 |
900 |
120 |
≥150 |
HWS 273 |
Φ273 |
500 |
1.2 |
1.0 |
1070 |
120 |
≥150 |
HWS 325 |
Φ325 |
500 |
1.2 |
1.0 |
1260 |
120 |
≥150 |
HWS 355 |
Φ355 |
500 |
1.2 |
1.0 |
1360 |
120 |
≥150 |
HWS 406 |
Φ406 |
500 |
1.5 |
1.0 |
1520 |
150 |
≥200 |
HWS 426 |
Φ426 |
500 |
1.5 |
1.0 |
1600 |
150 |
≥200 |
HWS 508 |
Φ508 |
500 |
1.5 |
1.0 |
1900 |
150 |
≥200 |
HWS 529 |
Φ529 |
500 |
1.5 |
1.0 |
1940 |
150 |
≥200 |
HWS 610 |
Φ610 |
500 |
1.5 |
1.0 |
2220 |
150 |
≥200 |
HWS 711 |
Φ711 |
500 |
1.5 |
1.0 |
2560 |
150 |
≥200 |
Andere afmetingen kunnen worden aangepast aan het verzoek van de klant.
Waarom voor ons kiezen?
As a factory supplier profit / Assurance for you:
|
About our products profit for you:
|
||
1.100% Brand new and High quality
|
1.Mix design, mix color, mix process for you winner market
|
||
2.100% on-time shipment protection
|
2.Basic models are available in stock, delivery time is short, good quality, can be customized
|
||
3.100% Payment protection
|
3.The combination of packages have more specifications and colors to choose. The scope of application and the scene will be more extensive
|
||
4.We passed SGS, UL, CE, RoHS, Recsh, Sony
|
4.Raw materials all the use of environmentally friendly materials, plant technology make your customers have no worries
|
Wij produceren dagelijks grote hoeveelheden voor vele landen gedurende meerdere jaren.
We hebben superieure krimpkous en terminals geleverd aan Europa, de Verenigde Staten verkopers voor vele jaren, we hebben onze eigen fabriek en uitstekend team. Als u grote hoeveelheden bestelt, bieden wij een zeer gunstige prijs. Elk probleem, neem gerust contact met ons op, we zullen ons best doen om uw problemen in een keer op te lossen.
Product Categorie : Krimpkous > Pipeline Engineering Tubing / sleeves
Thuis > Product List > Krimpkous > Pipeline Engineering Tubing / sleeves > Stalen pijplijn Heat Shrink Sleeve
Klik Hier om onderzoek te sturen
Ms. Joany Cao
Telefoonnummer:86-0769-81372186
Fax:86-0769-81372885
Mobiel:+8613580987327
E-mail:joany150138@keyuace.com
Adres:Building B, West Gate, Haoyu Industrial Estate, Miao bian wang village, Shipai Town, GD523000, P.R., Dongguan, Guangdong
Mobiele website
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.